e-Commerce Version 9.0A Update
Version 9.0.A Release Notes D4.0: December 14, 2004
This readme contains release notes and last-minute updates. Other documentation
includes the Installation and Conversion Guide (a printed copy should be
included with your software package), product user's guides, and the online
Help. Refer to the "Using this Guide" section of the Installation and Conversion
Guide for more information on where and how to find more documentation.
Table of Contents
Installation and Conversion Guide
Installation and Conversion Guide Doesn't Install Automatically
The Installation and Conversion Guide isn't installed automatically when
installing the software. You should install it yourself from the Cougar Mountain
CD.
To install the Installation and Conversion Guide, follow these steps:
- Insert the CD in your computer's CD drive. The installation should begin
automatically.
- If the installation does not begin automatically, select Start > Run from the Windows
desktop, browse to the CD Drive, and select CMSSETUP.EXE. Then select OK
in the Windows Run window to begin
the installation.
- Select Install User's Guides and Reader
from the Your Ultimate Website Installation window that appears.
- Read the Licensing Agreement and Warranty, and, if you agree, select the I Agree button. If you select I
Disagree, the installation will stop.
- Select the Installation and Conversion Guide check box and click Next.
- Verify that the directory to which the Guide will be installed is the
correct one, or use the Browse button
to select a different directory, and click Next.
- On the Ready to Install! window,
click Next.
- After the installation has completed, click
Finish to exit the installation.
- To access the Installation and Conversion
Guide .pdf file, select Start
> Programs > Your Ultimate Website > Documentation > 9.0 Installation and
Conversion Guide.
Back to Top
Disable CMS Logo/Splash Screen
Each module has a CMS logo in the center of the screen. This can be disabled so
the graphic will not appear.
To disable (turn off) the CMS graphic that appears in the center of the window:
- In the folder the software was installed (C:\CMSWIN by default), locate and
open the "CMS.ini" file.
- Beneath the [Installed] heading, add the following new line: NoSplash=1
- Nothing else should be changed.
- Save and close the file. The next time you open the software, the CMS logo
and graphic will no longer appear in the center of the window.
Back to Top
Disabling the "Trial Version Detected" Message
If you have installed the trial version of an add-on module and have decided not
to purchase the module, the "Trial Version Detected" message will continue to
appear until the application executable is either deleted, moved, or renamed. If
you need help with this process, please call Technical Support at
(800) 390-7053.
New Features for Version 9.0
Version 9.0 contains many powerful new features. You can see a detailed
explanation of these new features by looking at the online help (select the
question mark button in the Main Menu module) or the New Features section in the
user's guide, which can be installed on your computer from the product CD.
Back to Top
Printing
Printing Short forms in Windows XP Professional
If you are using Windows XP Professional and would like to print short forms on
a Dot Matrix printer, you will need to make some changes to your printer
settings and to the report in R&R Report Writer before it will print properly.
To modify a Cougar Mountain short form so you can print short forms in Windows
XP, follow these steps to set up your printer:
- Open the printer settings window by selecting the Start menu and clicking Printers and
Faxes.
- The Printers and Faxes window will
appear. Right click in the window and select Server Properties. The Print Server
Properties window will appear.
- Select the Create a new form check
box and, in the Form name: box, enter
a meaningful name such as "CMS Short Forms".
- In the Form description (measurements)
section, change the Width: box to 8.50in and change the Height:
box to 7.17in.
- Select the Save Form button. The form
name should appear in the Forms on:
list box.
- You have now completed the creation of a new printing form. Select the Close button to close the window.
Now that you have created a new form for printing short forms in Cougar Mountain
Software, you need to adjust some printer settings for the Dot Matrix printer
you want to print the short forms on.
To adjust your Dot Matrix Printer settings, follow these steps:
- In the printer settings window, right click on the dot matrix printer you
want to set up and select Properties
from the menu.
- Select the Advanced tab and change
the driver to Generic/Text Only.
- Select the Device Settings tab.
- Set the Cont. Feed - No Page Break to
the form you just created. In the previous steps we named the form "CMS
Short Forms".
- Set the other options to Not Available.
- Select the General tab.
- Select the Printing Preferences
button.
- Select the Paper/Quality tab.
- Change the paper source to Cont. Feed - No
Page Break.
- Select the Advanced button.
- Change the paper size to the report form created above. In these steps we
saved it as "CMS Short Forms".
- Select OK.
- Select OK.
- Select OK or Apply.
You have now completed the proper set up for the Dot Matrix printer. The next
step is to use R&R Report Writer to save this printer to the report to use as
its default printer.
- Open the short form in R&R Report Writer. You can do this by opening R&R
Report Writer within Your Ultimate Website and then selecting the short
form report you want to modify, or you can open R&R Report writer and find
the report in the Laser, Matrix, or Other folder.
- Once you have opened the report in R&R Report Writer, select the File menu and select Page Setup.
The Page Setup window will appear.
- In the Size drop down list box,
select the name of the form we just created. In this case we saved the
report as "CMS Short Forms".
- Select OK.
- Save the report.
You have now successfully created a custom printer form for printing short forms
and attached it to the short form report you want to print. If you are still
having problems printing, contact Cougar Mountain Technical Support.
Back to Top